Evaluation of the antiviral activity of ultraviolet light and zinc oxide nanoparticles on textile products exposed to Avian coronavirus.

This research has developed a piece of sanitizing locker-model equipment for textiles exposed to avian coronavirus, which has been put under the influence of UV light, UV + zinc oxide nanoparticles (phytosynthesized ZnONP), and water + UV, and, in turn, under the influence of the exposure time (60, 120, 180 s). The results linked to the phytosynthesis of ZnONP indicate a novel method of fabricating nanostructured material, nanoparticles with spherical morphology and an average size of 30 nm. The assays were made based on the viral viability of avian coronavirus according to the mortality of SPF embryonated eggs and a Real-Time PCR for viral load estimation. This was a model to evaluate the sanitizing effects against coronaviruses since they share a very similar structure and chemistry with SAR-CoV-2. The influence of the type of textile treatment evidenced the potential effect of the sanitizing UV light, which achieved 100% of embryo viability. The response of the ZnONP + UV nebulization showed a notorious influence of photoactivation according to the exposure time, and the 60-s treatment achieved a decrease of 88.9% in viral viability, compared to 77.8% and 55.6% corresponding to the 120 and 180-s treatments, respectively. Regarding the decrease in viral load between the types of treatments, UV 180 s reduced 98.42% and UV 60 s + ZnONP reduced 99.46%, respectively. The results show the combinatorial effect of UV light and zinc nanoparticles in decreasing the viral viability of avian coronavirus, as a model of other important coronaviruses in public health such as SARS-CoV-2.

Cu2O nanoparticles synthesized by green and chemical routes, and evaluation of their antibacterial and antifungal effect on functionalized textiles.

The potential for the application of metal-containing nanomaterials at the nanoscale promotes the opportunity to search for new methods for their elaboration, with special attention to those sustainable methods. In response to these challenges, we have investigated a new method for green synthesis of cuprous oxide nanoparticles (Cu2O NPs) using Myrciaria dubia juice as an organic reductant and, comparing it with chemical synthesis, evaluating in both cases the influence of the volume of the organic (juice) and chemical (ascorbic acid) reductants, for which a large number of techniques such as spectrophotometry, EDX spectrometry, TEM, SEM, DLS, FTIR spectroscopy have been used. Likewise, the nanomaterial with better morphological characteristics, stability, and size homogeneity has been applied in the functionalization of textiles by means of in situ and post-synthesis impregnation methods. The success of the synthesis process has been demonstrated by the antimicrobial activity (bacteria and fungi) of textiles impregnated with Cu2O NPs.

Use of Pineapple Waste as Fuel in Microbial Fuel Cell for the Generation of Bioelectricity.

The excessive use of fossil sources for the generation of electrical energy and the increase in different organic wastes have caused great damage to the environment; these problems have promoted new ways of generating electricity in an eco-friendly manner using organic waste. In this sense, this research uses single-chamber microbial fuel cells with zinc and copper as electrodes and pineapple waste as fuel (substrate). Current and voltage peaks of 4.95667 ± 0.54775 mA and 0.99 ± 0.03 V were generated on days 16 and 20, respectively, with the substrate operating at an acid pH of 5.21 ± 0.18 and an electrical conductivity of 145.16 ± 9.86 mS/cm at two degrees Brix. Thus, it was also found that the internal resistance of the cells was 865.845 ± 4.726 Ω, and a maximum power density of 513.99 ± 6.54 mW/m2 was generated at a current density of 6.123 A/m2, and the final FTIR spectrum showed a clear decrease in the initial transmittance peaks. Finally, from the biofilm formed on the anodic electrode, it was possible to molecularly identify the yeast Wickerhamomyces anomalus with 99.82% accuracy. In this way, this research provides a method that companies exporting and importing this fruit may use to generate electrical energy from its waste.

Electric Current Generation by Increasing Sucrose in Papaya Waste in Microbial Fuel Cells.

The accelerated increase in energy consumption by human activity has generated an increase in the search for new energies that do not pollute the environment, due to this, microbial fuel cells are shown as a promising technology. The objective of this research was to observe the influence on the generation of bioelectricity of sucrose, with different percentages (0%, 5%, 10% and 20%), in papaya waste using microbial fuel cells (MFCs). It was possible to generate voltage and current peaks of 0.955 V and 5.079 mA for the cell with 20% sucrose, which operated at an optimal pH of 4.98 on day fifteen. In the same way, the internal resistance values of all the cells were influenced by the increase in sucrose, showing that the cell without sucrose was 0.1952 ± 0.00214 KΩ and with 20% it was 0.044306 ± 0.0014 KΩ. The maximum power density was 583.09 mW/cm2 at a current density of 407.13 A/cm2 and with a peak voltage of 910.94 mV, while phenolic compounds are the ones with the greatest presence in the FTIR (Fourier transform infrared spectroscopy) absorbance spectrum. We were able to molecularly identify the species Achromobacter xylosoxidans (99.32%), Acinetobacter bereziniae (99.93%) and Stenotrophomonas maltophilia (100%) present in the anode electrode of the MFCs. This research gives a novel use for sucrose to increase the energy values in a microbial fuel cell, improving the existing ones and generating a novel way of generating electricity that is friendly to the environment.

ZnO Nanoparticles Obtained by Green Synthesis as an Alternative to Improve the Germination Characteristics of L. esculentum.

Tomato is an important crop due to its nutritional contributions and organoleptic properties, which make it an appetizing vegetable around the world. In its sowing, the use of seed is the most accessible propagation mechanism for farmers. However, the induction to germination and emergence is often limited in the absence of stimulants that promote the development and growth of the seedling, added to the interference of infectious agents that notoriously reduce the vitality and viability of the seed. Given this, it was proposed as a research objective to determine the effect of zinc oxide nanoparticles (ZnO NPs) mediated by a green route on the germinative characteristics of Lycopersicon esculentum Mill. 1768 "tomato". The experimental phase consisted of the synthesis of ZnO NPs and its subsequent characterization. After its synthesis, its inoculation was conducted during the germination of seeds of L. esculentum, considering six sample groups for the treatment with zinc nanoparticles (T1: Control; T2: 21.31 ppm; T3: 33.58 ppm; T4: 49.15 ppm; T5: 63.59 and T6: 99.076 ppm). The results indicate that concentrations close to 100 ppm of ZnO NPs are ideal in the treatment of L. esculentum seeds, due to the promotion of enzymatic and metabolic activity to achieve cell elongation; likewise, the biosynthesized nanoparticles showed no phytotoxicity, due to the fact that, in all the treatments, there were processes of germination and emergence. This was linked to the generation of a Zn0-phenolate complex through a chelating effect, which generates compatibility with the seed and, compared to classic inorganic synthesis, usually shows phytotoxicity. In this sense, green synthesis is presented as a great alternative in this type of application.